Amaco Velvet Morning Fog Brush-on Underglaze
Amaco Morning Fog Velvet Underglaze fires to a light, misty grey when fired to cone 05, darkens to a steamy colour at cone 5, and maintains the foggy colour at cone 10. A clear glaze accentuates the colour of the underglaze significantly at any temperature.
Amaco Velvet Amethyst Brush on underglaze has saturated colour, dependability, and versatility making the Amaco Velvets as popular for professionals as they are for children.
- Velvets fire true-to-colour as a Cone 05/06 underglaze or fired to Cone 6.
- Some colours remain true as high as Cone 10.
Try two finish possibilities:
- When left unglazed these colours have the rich textural appearance of velvet.
- When covered with a Clear Transparent Matte or Clear Gloss Glaze they intensify in colour.
Good to Know:
- Can be easily applied to wet clay, greenware, or mature Cone 04 bisque.
- Saturated Colour
- Apply to unfired clay or bisque.
- True to colour, unfired colour similar to fired colour.
- Sprayable.
- Can be used with or without glaze.
- Non-toxic (lead-free)– Perfect for tableware. Please follow manufacturer instructions.
Amaco Velvet Morning Fog Brush-on Underglaze
59
Stoke-on-Trent
Campbell Road
Stoke-on-Trent ST4 4ET
United Kingdom
Amaco Morning Fog Velvet Underglaze fires to a light, misty grey when fired to cone 05, darkens to a steamy colour at cone 5, and maintains the foggy colour at cone 10. A clear glaze accentuates the colour of the underglaze significantly at any temperature.
Amaco Velvet Amethyst Brush on underglaze has saturated colour, dependability, and versatility making the Amaco Velvets as popular for professionals as they are for children.
- Velvets fire true-to-colour as a Cone 05/06 underglaze or fired to Cone 6.
- Some colours remain true as high as Cone 10.
Try two finish possibilities:
- When left unglazed these colours have the rich textural appearance of velvet.
- When covered with a Clear Transparent Matte or Clear Gloss Glaze they intensify in colour.
Good to Know:
- Can be easily applied to wet clay, greenware, or mature Cone 04 bisque.
- Saturated Colour
- Apply to unfired clay or bisque.
- True to colour, unfired colour similar to fired colour.
- Sprayable.
- Can be used with or without glaze.
- Non-toxic (lead-free)– Perfect for tableware. Please follow manufacturer instructions.
| Glaze Temperature Minimum | 1220 |
|---|---|
| Glaze Temperature Maximum | 1040 |
| Glaze Temperature Range | 1040-1220 |
| Glaze Colour | Grey |
| Glaze Finish | Matt |
| Glaze Range Series | Amaco Velvet |
| Lead/Leadless Glaze | Leadless |
| Safe for Spray Application | Yes |
| Food Safe | Yes |
The design voltage all U.K. supplied kilns should be 230v. This is the nominated U.K. supply voltage. However, electricity suppliers are permitted a voltage fluctuation range of -6% to +10% meaning the supply can vary between 216v and 253v.
This WILL affect the power output of your kiln. This variation will not be noticeable on most kilns, but 2.9 / 3kw units may be adversely affected. If the voltage is as low as 216v, the kiln could be drawing 11A or less (which will cause the kiln to fire for much longer than necessary and overheat the plug), and if the voltage is as high as 253v, the kiln could be drawing 14A which is problematic on a 13A plug.
All kilns, or any 2.9kw unit, such as fan heaters or oil filled radiators etc, that operate from a U.K. 13amp, three pin plug top can result in the plug and socket getting warm to the touch. However, this will vary depending on the condition
and age of the socket being used, the condition and fit of the plug top and the actual voltage of the socket.
It is recommended that you monitor the plug during firings, your plug should feel warm or neutral - not hot. If the plug feels unusually hot, we recommend that you contact a qualified electrician to assess the plug and socket condition
whilst the kiln is being used and the voltage to the kiln, which will affect the power drawn by the kiln. They may decide that the kiln is better to be on its own dedicated switched spur supply, or dedicated 16amp supply.
This recommendation is for ANY 2.9kw / 3kw kiln, of ANY MANUFACTURER, any oil filled radiator, fan heater, tumble dryer, or any other appliance of this KW rating.
- A potter and sculptors favourite place to shop for over 40 years. We have everything you need!
- A wide and relevant product range with fantastic stock availability!
- Our prices are transparent and competitive!
- Expert technical advice with every purchase!
